Technology in terms you understand. Sign up for the Confident Computing newsletter for weekly solutions to make your life easier. Click here and get The Ask Leo! Guide to Staying Safe on the Internet — FREE Edition as my thank you for subscribing!

How to Back Up Before a Windows 10 Upgrade

Important protection in case something goes wrong

Back Up!
(Image: canva.com)
Always back up before a Windows 10 upgrade, update, or reinstall. Create a full system image backup of up your entire machine.
Applies to Windows: 10
Question: I’m about to upgrade my operating system to Windows 10. How do I protect myself if something goes wrong?

I’m about to reinstall Windows. How do I start?

Simple: back up before that Windows 10 upgrade or reinstall.

And by that, I mean take a complete system image backup of your entire computer before you begin the update or reinstallation process.

I’ll explain what that is, and how it protects you from disaster.

Become a Patron of Ask Leo! and go ad-free!

TL;DR:

Before a Windows 10 upgrade or any major change, create a system image backup using Windows’ built-in tool or a free alternative. Place the backup on an external hard disk and save it until you’re satisfied your system is working properly. If something goes wrong with the update, you can “undo” by restoring the image.

What: a system image backup

A system image backup contains a copy of everything on your system, including:

  • The operating system
  • All applications
  • All settings and customizations
  • All your data

There’s no guesswork. It will back up everything you could possibly need.

When: back up before Windows 10 upgrade

Immediately prior to any major system update — be it a Windows 10 upgrade, one of the major twice-yearly Windows updates, or a complete reinstall of the operating system — make a back up image of everything.

Just  in case.

Why: undo

Either an upgrade or reinstall could leave you wishing you hadn’t.

Maybe the upgrade turns out to be incompatible with your system.

Maybe it’s incompatible with you: you just don’t like it!

Maybe something else is wrong — a personal preference or system flaw — that makes you regret the upgrade.

Your image backup is your “undo”. If you back up before a Windows 10 upgrade or reinstall, you can restore it and the upgrade will be “undone”. Everything will be as it was before you started.

How: making a system image backup

The process is simple: run backup software, telling it to create a system image backup and where to place it.

You can use Windows’1 built-in backup program. While I’m not a huge fan, it does meet this need. Creating a Backup Image Using Windows’ Built-in Backup walks through the process step by step.

My personal preference, however, is that you run a more fully featured alternative, such as Macrium Reflect or EaseUS Todo. Creating a Backup Image Using EaseUS Todo Free walks through the process with that tool.

For either Macrium Reflect or EaseUS Todo, the free versions are perfect for taking complete system image backups, and that’s all you need here.

Where: an external drive

I strongly recommend creating the image backup on an external hard disk.

Save the image until you’re confident your newly installed operating system works and is to your liking.

As an alternative to an external drive, you could save the image to another computer on your home network, if you have that set up. Both EaseUS Todo and Macrium Reflect let you choose network locations for backup images. The backup may take a little longer, but you won’t need any additional hardware.

The one place not to place the image, of course, is on a hard disk internal to the computer you’re backing up.

Recovery: using your backup image

If you need to restore your backup, the process varies depending on the software you’re using. It typically boils down to this:

  • You create “rescue” or “emergency” media — a bootable CD, DVD, or USB thumb drive — for the backup software. You can do this on another machine, if you like. If you’re using Windows’ built-in backup, the original installation media works, or you can create a recovery disk; Create a Windows 10 Recovery Drive shows you how.
  • Boot from the rescue media.
  • Attach the external drive containing the backup image to your computer.
  • Use the backup software from the rescue media to restore the image to your computer. This erases everything on the computer and replaces it with the image. Restoring an Image Backup Using Windows 10’s Built-In Backup walks through this process.

99% of the time, you will never need to do this.

But that 1% is why I so emphatically recommend creating the backup image: you’ll be able to do revert if you need to.

Backups: none of this should be news

If you’re already doing what I really recommend — backing up daily and automatically — not only should none of this be news, none of this should even be necessary.

You’re already backing up.

You’re already creating image backups.

You’re already doing it daily.

You’ve already backed up before a Windows 10 upgrade, or anything else.

Should you need to “undo”, you can. Everything you need is in place.

I recommend backing up regularly not just for major OS updates, but because it’s the right thing to do. You’re much more likely to run into a problem from hardware failure or malware infection than you are from a Windows 10 upgrade.

Regular backups protect you from it all.

For more information, How to Back Up Windows 10 covers the steps to back up and restore your computer using Windows’ built-in backup tool as well as the free version of EaseUS Todo.

Do this

Subscribe to Confident Computing! Less frustration and more confidence, solutions, answers, and tips in your inbox every week.

I'll see you there!

Podcast audio

Play

Footnotes & References

1: Included in Windows 7 and later.

61 comments on “How to Back Up Before a Windows 10 Upgrade”

  1. I’d add two steps to the restore process.
    Before restoring to the previous system image, make a system image back up your Windows 10 installation.
    Then, after restoring the system image of the previous OS, copy all of the data files you’ve created using Windows 10 to your newly installed system. If you made a fresh install of Windows 10, that would include all of your data files.

    Reply
  2. My experience with Windows 7 was pretty uneventful except for a few hiccups installing it keeping all of my programs and settings. There are a few minor glitches which still show up like losing some file associations which have to be re-established. But working for Ask Leo!, I’ve seen enough horror stories to say make a full system backup of your system before upgrading or reinstalling and make a copy of your backup before proceeding you can simply copy the backup files from one external HDD to another. If there’s only one copy of the original system image, it’s not backed up.

    Reply
  3. Thank You Leo. You answered my question in this ezine before I had to ask it. “Could I go back to Windows 7 after installing Windows 10.” Yes, I’ve been using Macrium Reflect for the past couple of years. It saved me a few time when I downloaded and executed different programs, even though I always try to download from known sources. Sometimes when I uninstall a program some parts are left and a restore takes care of that.

    Reply
  4. Try telling Macrim Reflect that you want a “System Image Backup”. THERE IS NO SUCH CHOICE! Once again in Reflect 6.0 you can make a backup of “selected disks” or “partitions to restore Windows”. Simply either bad technical writing or Reflect CANNOT make a complete system image backup.

    Reply
    • Macrium Reflect does full system image backups. They call it “Create an image of the partition(s) required to back up and restore Windows” (Yes they spelled back up wrong. Backup is a noun; back up is a verb. :( )

      There is also a link near the middle of the main screen which says “Image this disk”. That will also make a system image.

      Reply
    • It’s not possible for a program to list all possible synonyms for what something might be called. Both are variations of System Image Backups.

      Reply
  5. Note that Windows 10 has an option to revert to the previous OS as long as you do it within the first 30 days. Though having an image as Leo suggests is a good idea – a very good idea, a very very good idea.

    Reply
  6. I tend to agree with other posters about not liking macrium reflect. I did in fact try it on my Win 8.1 machine before changing anything and got the recover disc to boot mode just fine. However, when I went to recreate the disc for another copy from within reflect, that disc DID NOT work. I have used acronis forever on Win7 and earlier windows just fine. I just did not want to upgrade to individual copies (price $) for a version that supported new OS. Anyway, tried macrium on my other machines and not even 1 boot disc would work. I did get the original boot disc imaged for another copy but my systems are all totally different configurations (rather old cpu’s, motherboards, controller cards for old old hardrives and reflect can’t boot them). I’ve tried most of the top free contenders for imaging software and found most of them slow at doing the job after getting under the hood on settings and learning curve. Someone here mentioned AOMEI backup and so I decided to try it out. WOW, ALL my computers boot discs work, all win OS versions and it’s FAST at imaging and also free. It’s my new save me from disaster favorite. Just my experience for rolling back to a good time frame.

    Reply
    • I’ve tested Aomei and EaseUS Todo Backup, and found them both to be excellent. I use Macrium paid edition on my main computer, and EaseUS Todo Free on my other machines. The ransomware protection and Macrium Redeploy are the main reasons I pay for Macrium Reflect.

      Reply
    • Western Digital offers a free version of Acronis and will work on any machine that has a Western Digital drive. As an Electronics Engineer and IT Pro, I heartily recommend every Western Digital product (except for the low-cost “Portable Drive”s). In fact WD invented the Winchester mechanism for what we now call a “Hard Drive”. First and Best.

      By the way, most retail PCs include a WD “Blue” series drive. It’s perfectly fine, but they have many other series that are faster and more reliable, and only a bit higher cost. When I’m building a PC for commercial use, I normally use Black – It’s a bit faster and a lot more reliable – or Green – which comes at a decent price and consumes substantially less power and therefore throws off less heat. All the info is at wd.com. btw, I don’t get anything from WD. Like Leo, I recommend what is proven to work well and add no worries to my life.

      Reply
      • The same is true of Seagate as long as you have one of their drives (internal or external) on the system. It also works with several other makes – Fujitsu is one, I think. Functionality outside backup and restore is limited and prompts you to get the paid upgrade. Beware, don’t be mislead by the latter’s claim to create VHD files from its proprietary backup in the current paid version , it only actually creates Microsoft .vhdx files – no good for Virtualbox users!

        Reply
  7. Now, after about a year of using Windows 7 backup and system image, they’ve done their usual, and introduced errors. two days ago, I wasted over 12hrs with new glitches and fails until I found a ‘workaround’. Meanwhile, they have: lost my upgrade link; lost my outlook ‘keep signed in’ on Firefox (it is back now on IE11), and of course the evil Windows 10 attempted forcefeed, which just would not stay away for months. Sure hope I can figure out Linux when I finally make the break………

    Reply
    • Leo is looking into EaseUS TODO free and Aomei Backupper as possible alternatives. I checked both. My conclusion is that all 3 do the job. (Update: We recommend EaseUS Todo Free).

      I find EaseUS and Aomei both excellent, and it’s difficult to say which is better. They both include incremental backups in their free versions, an advantage over the free version of Macrium. The inclusion of incremental backups in the free versions is why Leo had me check them out. I’ve found Aomei and EaseUS both very easy to use. I use the paid version of Macrium, and I’ve found that Macrium’s strong suit is in the scheduling options. The learning curve for that is a bit steep, following Leo’s instructions in his book make it easy. Now that Macrium 6 is out, it offers differential backups in the free edition, which although they take up more space than using incremental backups, the space requirement is probably not so much greater for the average person unless they add lots of photos, music and/or videos.

      Reply
  8. Won’t “Image selected disks on this computer” and then choosing all the disks, give you a total B/U?
    What EXACTLY does “Create an image of the partition(s) required to back up and restore Windows” buck up? E.g. if your data is all on disk D does it get backed up?

    Although Macrium has saved me I still think it is unnecessarily complicated. The 2 options above are excellent examples.

    Reply
    • It should if you selected all of the partitions of your system drive.

      “Create an image of the partition(s) required to back up and restore Windows” backs up everything on your system hard drive. This should include the D; drive if it on the same physical platter as the C: drive. You can check to see if this is the case by looking at the top row where it lists the partitions of the system drive. Make sure it is ticked. If not tick the checkbox.

      There are a few roads which lead to Rome in many programs.

      Reply
  9. OK I just read the relevant chapter of Leo’s book. NO the D drive is not backed up unless I select the right option.

    But after I revised my schedule I got a problem that I’ve had with macrium several times. Without warning the program hangs up. It continues running but does nothing. The only way to get it to run is to shut down and restart the computer and run the backup manually. Shutting down Macrium with task manager won’t do it. This is very irritating and never occurred with Ver 5. Obviously if you don’t catch it, you’re sunk because it stops all backups!

    Reply
    • I am using Macrium Reflect 6 Free version and it stopped working the other day and I cannot get it going again. BTW, Macrium will NOT let you join their Forum unless you have a Paid version. It is a British outfit…hmmm…

      Here is a quote from an e-mail I got from them today: Hello Peter, Thanks for contacting us. The forums is for paid customers only. Regards, Gosha Kolosov – Macrium Support.

      BTW Leo, I love your e-mails, I have been getting them it seems forever. I like to read all of them and get a lot of useful info. Thanks very much.

      Reply
  10. All the comments about back ups shown above have my attention. I’m not a geek but I have used a computer for longer than I care to mention. I never get into the real fine points because I’m one of the lazy ones that just want my system to work – like an automobile – I’m not a mechanic either. Leo, I’ve read your instructions from your 4 suggestions on how to revert back from Windows 10 to Windows 7. But I’m nervous about doing it since I did not do a full image backup just before I installed the new OS. I do have a backup from late July. Will that work ok and I’ll just lose anything I’ve added (not much) since then?
    I’ve posted your web address on my Facebook timeline so more people will contact you for info on this issue and know that I trust you highly.

    Reply
    • If that’s a full image backup from July, then exactly – it should work and the only thing you’d lose are all changes and updates made since then. Caveat: I don’t know what backup software you’re using, but conceptually what you describe should work.

      Reply
  11. My feeling is to take an IDENTICAL HDD… and then make a CLONE before the upgrade…
    If I do not like what I see, I remove the “upgraded HDD” and put in the “back-up” (a.k.a. a “hot spare”)..
    I am a bit surprised that this was not mentioned at all!
    –Zvi

    Reply
      • A true clone copies sector by sector. That is to say, Platter 1, Track 1, sector 1, is copied exactly to Platter 1, Track 1, sector 1 of the clone. It also copies partition information, recording format, boot settings, the sector map and platter layout, and all the rest. It’s a true “bare metal copy”. Turns out it’s pretty easy to do that. The software doesn’t have to find all the bits of a file (any file is separated into 1k blocks and scattered all over the drive wherever there’s space. It just reads a sector, writes a sector, and repeat until every physical sector until done. Note that a clone will have the same fragmentation as the original, whereas a file copy will give you nicely ordered, tight files, until you edit anything.

        Reply
  12. I have upgraded to Windows 10 from 7 Ultimate and am perfectly happy with it. What happens if i want at some stage after year 1 to format my hard drive and reinstall programs. Do I then have to buy Windows 10 ?

    Reply
    • Worst case I think you reinstall Windows 7 and then upgrade it again. Better would be to have an image backup of Windows 10 installed that you would just restore.

      Reply
      • As long as you keep the license key from your Windows 10 installation, you should be able use it over and over again on the same machine. For example you could install 2 identical copies of Windows 10 and dual boot, both using the same license key. Because you only run one at a time, on the same PC for which you were ranted the license, it’s not just legal, Microsoft can’t tell the difference. (D’uh. There IS no difference).

        Btw, if you replace a dead computer with new hardware, and therefore try to reuse your existing Windows license on the new machine, you usually need to call Microsoft and they will fix their license database manually.

        Reply
    • After you have done the upgrade, a hash ( hardware identifier ) of your computer is stored at MS. If you use the tool supplied by MS, to make a thumb drive with Win 10 for installing, then you should be able to do a clean install later on with out having to worry about activation. After I upgraded, my hard drive went, and I had no issues with doing a clean install on the new one , and activation was instant.

      Reply
      • Exactly. When Microsoft automatically updated my laptop to Win 10, although I had no key, I immediately went online and downloaded a copy of Win10 image and put it on a USB stick. When I recently had HDD problems, I used the stick to install a fresh copy of Win10 on a new SSD drive. I didn’t use a backup/restore because I had nothing on the failed drive except the OS. During the installation it asks if you want to register your copy. Since I did not have a key, and not wanting to have to install my original Win7 first, then upgrade, I just cursored past that window and never activated anything. I fully expected to see another request to activate or lose the program about a month down the road, but it’s now been several months, and nothing… the machine runs perfectly and updates are all installed without question from Microsoft. I think Microsoft recognizes you

        Reply
  13. I’m a PC tech and tested the upgrade vs clean install process regarding activation. Gary T. above is correct that when you first UPGRADE from Windows 7/8/8.1 to 10, a hash ( hardware identifier ) of your computer is stored at MS. Subsequent installs will use that hash and automatically activate your Win 10.
    To verify this, I took an older shop PC with Win 7 Home Premium and upgraded it to Win 10 Home and it activated just fine. Then downloaded the Windows 10 tool, created a CD and then booted the CD, wiped the drive and did a clean Win 10 install and it also activated. Then, to see if a new HD would cause a problem, I put in a brand new HD and did a clean Win 10 Home install using the CD and it also activated just fine!

    Reply
  14. Leo,
    Thank you for the Macrium Reflect Free tutorial. I am replacing Windows Vista with Windows 10. I have followed your instructions step by step. I backed up all my files on my external hard drive and followed all the steps to back up the system image from my C and D drives to my hard drive (H drive) and received the following error message; Backup Aborted!-Unable to read from disk-error code 1117-The request could not be performed because of an I/O device error. I work out of my home office and need to complete this task ASAP. Do you have any helpful input? Thanks again!

    Scott

    Reply
  15. I have a Dell Windows 7 Ultimate with 2 hard drives: a C drive and an F drive. Can I do a backup Image of the C drive and store in on the F drive and then install the free Windows 10 on the C drive?? Should I reformate the C drive before installing or would installing the new Win 10 take care of ‘cleaning’ the C drive for use with Windows 10?

    Reply
    • I never recommend backing up to a drive inside the box. It can work, but it’s a risk as a problem with the box can take out all drives at once.

      You don’t need to reformat C: before upgrading to Windows 10. In fact you don’t want to, so as to be able to preserve all your programs and data.

      Reply
  16. Hi I have a question about bakups! I have a 4TB hard drive that I diveded into 4 Partitions and I wanted to do a Image Backup to one of my Partitions. When I tried to do it the Backup software only reconized the whole drive NOT the 4 partitons. So if I go foward it would wipe the entire drive! Is their any way to reconize the 4 partitions so I can make up 4 seperate images?

    Reply
  17. I have 3 HDs, each with 4 partitions. (12 total)
    I have “Program Files” folders on all 12, where I installed various software.

    Windows 7 is *ONLY* on 1 of the 12 partitions.

    I need to know *WHY* I should back-up massive files on all 12 partitions, if my W10 upgrade is only going to touch C:\.

    It’s not enough to just say “do it”… I need to explain *WHY* to several of my managers. They need more info than just “do it just in case”.
    (We will eventually have to upgrade 40 different W7 machines, so you can see the massive amount of over-time the company will have to pay to have,
    and external HDs will have to buy.)

    Reply
    • It’s normally OK just to back up the system drive, but the fact that you have program files on those other drives could potentially put some of those installations at risk. If you’re willing to risk that or have installation files for those programs, you could probably get away with backing up just the system drive. In any case, those drives need to be backed up simply because any unbacked up drive is at risk.

      Reply
    • Those partitions should be getting backed up regardless of whether or not you upgrade, because hard disks fail, data gets lots, “stuff” happens.

      You need to ensure that the C: partition and the boot record is getting backed up before an OS upgrade. THat means, to me, backing up the entire physical disk that contains C:. All else is optional with respect to the OS upgrade, in my opinion.

      Reply
      • I specifically did NOT want to give my manager a reason of “we need to back everything up… because we need to do regular backups”.
        That’s not what this is about.
        This is *ONLY* about “the minimum needed before moving from W7 to W10, today”.
        (Trying to budget in $1000s of dollars for a truck load of massive external drives… is something we will discuss in 2017, not today.)

        Maybe I should ask this question a differ way:
        Will a W7 to W10 upgrade change *ONLY* things on my C partition?
        (Or will it also change D E F and G on that same C drive…. as well as H and I on my 2nd drive?)

        Not sure why an OS upgrade will change the boot partition at all. (I thought that was only to define the partitions and drive specs, not “are
        you running W7 or W10 now”?

        Reply
        • Thought I answered that, but yes, the minimum required is C: and the boot record. Yes, the upgrade can touch the boot record. The easiest way to back those both up is to back up the physical disk, no matter how many partitions it has. But that’s up to you.

          Reply
  18. I use Macrium on my desktop on a good schedule. Is has worked well and has saved me. I had problems with EaseUS. It seemed to “break” ever time a new major version came out, so I switched. I also use AOMEI backupper on machines I am repairing for friends and family. It is also the only one that worked for me on my W10 laptop that I was upgrading to a SS drive. EaseUS and Macrium would not do the clone and also had problems just doing a restore from backup. AOMIE worked perfectly the first time.

    Reply
  19. When I upgraded from windows XP to windows 7, I just got another clean drive, so the old drive became the backup in addition to the ones I did with
    macrium. I connected the old drive externally to transfer files. Saved time. Did not have to boot from cd and all.

    Reply
  20. As Julia wrote, I agree with having a new disk for clean OS upgrade and just using
    the old one as a second drive, after having done the new installation first, is the method I use. Then it is easy to copy all necessary data to the new installed system, even %USERNAME%\Appdata folders. Naturally most programs need to be reinstalled, but on the otherhand one has a clean system to start with. And of course everything is backed up regurally.

    Reply
  21. Leo,
    I use Norton Ghost for backup. All my computers have a second hard drive,D, which I backup to. Then about once a month, or when I make a major change, I have a third hard drive that I temporally put in the computer and use Acronis and clone the hard drive then take it out and set it on a shelf for safe keeping. This system that I use has saved my bacon several times and saved me a lot of grief over the years. All my computers have 3 dedicated hard drives assigned to them, one for C, one for backup, D and one cloned. I call this cheap insurance.

    Reply
  22. I have a problem with creating a system image of my laptop.

    I have a Lenovo ThinkPad X220 Tablet laptop that runs on Windows 10 (64-bit version). It does not have a CD drive. I have a 1 TB external hard drive that I want to save the system image to. I keep getting a message that it’s not a valid drive — but it doesn’t say why. I cannot use a thumb drive, since thumb drives are formatted in FAT, rather than NTFS.

    I seem to be stuck. How can I create a system image when I have no place to save it to?

    Reply
  23. Leo, I see that you often recommend Macrium Reflect FREE version. Is there ever a time when an ordinary home-user like me should consider the paid version?

    Reply
    • If you want the extra features the paid version offers, for example, incremental backups which is a great feature. If you want a free program which offers incremental backups, Leo also recommends EaseUS Todo Backup. I find Macrium Reflect had better scheduling options. It’s all a matter of checking the features the paid versions offer and deciding what you want.

      Reply
    • The missing feature, I believe, is incremental backups. I generally recommend those, so that and the ability to get support from Macrium are two good reasons.

      Reply
  24. I just got a Dell XPS 8940 with an SSD (which has the operating system on it). Using Macrium Reflect v. 7.3, I made a bootable version of it on a CD. When I uploaded the software with the bootable CD, the SSD did not show up at all, especially not as the drive that I wanted to make an image of. Solution? Is it possible that, if I run the software on an up and running computer (i.e., not the bootable CD with Macrium Reflect on it), this version of the software will recognize the SSD? I’d prefer not to load the Macrium Reflect software into my virgin computer. I want to make as clean an image as I can.

    Reply
    • I’m not sure what to tell you. While I DO go ahead and install Macrium (first) on my virgin machines so as to take that initial image, I have at least once done exactly what you’re describing, and it worked just fine. I was able to make a truly pristine image of the hard drive. On a Dell XPS no less. ¯\_(ツ)_/¯

      Reply
      • Thanks for getting back to me. Are you using the free version of Macrium Reflect. (I am.) You installed Macrium Reflect on your virgin machine and used this installed version of Macrium (not a bootable CD) to make an image of your hard drive?

        Reply
        • I’m using paid, but free should work. And indeed, I installed and then immediately used the installed version to make an image. This is what I normally do.

          As a proof of concept I once did make a Macrium boot disk on another machine, booted my new machine from that disk, and then created an image of the as-yet-un-booted system disk. Worked as well. Here’s the article that discusses that experiment: The Journey to My New Computer: The First Thing I Do.

          Reply

Leave a reply:

Before commenting please:

  • Read the article.
  • Comment on the article.
  • No personal information.
  • No spam.

Comments violating those rules will be removed. Comments that don't add value will be removed, including off-topic or content-free comments, or comments that look even a little bit like spam. All comments containing links and certain keywords will be moderated before publication.

I want comments to be valuable for everyone, including those who come later and take the time to read.