Technology in terms you understand. Sign up for the Confident Computing newsletter for weekly solutions to make your life easier. Click here and get The Ask Leo! Guide to Staying Safe on the Internet — FREE Edition as my thank you for subscribing!

Do I Need to Make a New Rescue Disc Every Time My Backup Software Updates?

Question: Hi Leo, I’ve been using the free Macrium Reflect program to back up my Windows computer. However, I’m finding that when I try to do an image or a clone backup, I’m prompted each time to update the software. This requires making a new rescue disc each and every time, which can be fairly time consuming as I’m using Macrium Reflect to backup up my desktop PC and my laptop, too. I’m concerned that if I don’t make a rescue disc each time the software asks me to update (which is every time I open it), my backups won’t work and I’ll be “you know what” out of luck! Can you advise?

You don’t need to make the rescue media every time you back up.

You don’t even need to make a new rescue media each time Reflect updates itself. There are times when you might want to, but even then, it’s not a disaster if you don’t.

Become a Patron of Ask Leo! and go ad-free!

TL;DR:
  • Create rescue media when you first install your backup program.
  • Create new rescue media when taking major version updates of the program.
  • Create new rescue media if the regular update process indicates that there are important fixes to the rescue media.
  • Even if you do none of the above, you can make rescue media when you need it, using a different computer.

Rescue media

Rescue MediaIn order to restore a backup image to a hard drive, that hard drive can’t be in use by any other software. Booting from the hard drive means that Windows itself is using it, so you need to boot from something else.

That “something else” is the rescue media or rescue disc. It’s also referred to as an “emergency disc” or other terms by other backup programs. It’s typically a CD or USB stick from which you can boot your computer should you need to restore a backup image to the computer’s hard drive.

Most backup programs encourage you to create rescue media when you first install the backup software, or perhaps after performing your first backup. In any case, creating a rescue disc is something you can do at any time from within the backup software.

And, yes, I’d encourage you to create rescue media, as well as make sure you can boot from it, so you know you’re prepared should the need ever arise.

Backup software updates

You absolutely don’t need to make a new rescue disc for each backup. The only time you might consider it is when the backup software itself updates.

My recommendation is that you only make new rescue media on major version updates (say, version 6 to version 7) and not on minor updates (like 6.1 to 6.2) unless the release notes indicate a compelling reason to do so.

And, honestly, even then I’m likely to overlook it and not bother with a new rescue disc.

As I said, it won’t be a disaster.

Last minute need

So you’ve misplaced your rescue disc or you didn’t make one at all. Or you suddenly realize that your rescue disk is for version 4 of the backup software, and you’ve since upgraded to version 7.

And all of a sudden you need to restore a backup image.

Not to worry. You can create one at the last minute.

On another machine — even that of a friend, if needed — download and install the backup program if it’s not there already (the free version will typically do), and create the rescue media. Then take that rescue media to your own machine, boot from it, and you’re good to go.

Rescue media isn’t tied to your machine, account, purchase, or activation. Any current copy of rescue media for the backup software you use should do just fine.

It’s also typically backwards compatible, so if you were backing up using version 4 and all you can download in your time of need to make the rescue media is version 7, it’s still not a problem. Newer rescue media should read and restore older backups just fine.

The most important thing is that you’re backing up. As long as you’re doing that, almost everything else can wait until it’s needed, even at the last minute.

Do this

Subscribe to Confident Computing! Less frustration and more confidence, solutions, answers, and tips in your inbox every week.

I'll see you there!

Podcast audio

Play

18 comments on “Do I Need to Make a New Rescue Disc Every Time My Backup Software Updates?”

  1. I’m using Macrium Reflect paid version to backup. I make differential backups and incremental backups from the same initial backup. For example, I made the initial backup, a couple of differential backups, a couple of incremental back ups, another differential, and an incremental backup, and so forth. Will this “mess up” my ability to restore with Macrium? Thank you.

    Reply
    • “Mess Up”? No. But it does make things somewhat confusing. I don’t recommend mixing incremental and differentials. I’d make a periodic full backup and then do either incrementals or differentials based on that.

      Reply
  2. I have a problem with the term “Free Download”. I know it does exactly what it says, however, I can’t help but think “Free Download” is used just to get those people who are not computer literate to download the product, thinking that it is FREE, then only to find out you have to “Register” the product, at which point you find out that it costs $$$$. Some of these fixit programs go as far as fixing a certain number of “bad” finds on ones computer and for $$$$ it will fix the rest. I think this is misleading to a lot of people. Also, consumers should be made aware most of these programs will NOT fix corrupted Registry problems. They are MS problems at which point you would have to have a MS technician fix it. People should be aware if they have Registry problems, Malware problems, or their computer has been infected with a virus(s) their best fix, both for expense and time, is to reload the Operating System (OS).

    Reply
  3. After having my earlier backup program fail me when trying to install a backed-up image on my netbook (long story about that!) I tried the free Macrium Reflect. Among other things, it offers 2 types of recovery discs: a Linux-based recovery program and a Windows PE-based that requires a 1.7 GB download to help make the recovery environment. The program makes an XML type image that can be browsed in an explorer-like interface to install the whole image or just a specific file. I found that the netbook interface would work only with the PE disc, probably due to the non-existence of an onboard optical drive. Still, it would be worthwhile to make both styles of recovery discs and play with them to see which can work. It did save my bacon on the netbook (I had to buy another netbook of the exact same make/model to obtain a working OS image) and will be my backup of choice.

    Reply
  4. The release notes will usually tell you whether you need to burn a new rescue disc – at least that’s what I saw with Macrium.

    Reply
  5. Burn your rescue media to USB thumb drive (preferably USB3), not CD/DVD. Faster and cheaper. You’ll need a relatively new PC that can boot from USB drive so you can restore.

    Be careful what device you select when creating rescue media – I recently wiped a USB HDD instead of the thumb drive.

    I think CDs and DVDs are being slowly replaced with USB drives …

    Reply
  6. What size CD or DVD should be used to create the MR rescue disk?

    If it’s really not necessary to create a rescue disk until the time it’s needed, then why is it important to test the disk to be sure it works? I’d like to see more details for how to test the rescue disk and an explanation of what it is I’m looking for when I test it.

    Learning to boot from a CD was a class in itself. After that learning curve, and I have managed to boot from the rescue disk, and managed to get to the Macrium Reflect screen, is that where I end? Or am I supposed to actually try to access a MR image on an external drive?

    After testing the rescue disk, I have not found what the next steps are. Obviously, I need to exit MR. Then what? Eject the CD? At some point, go back to BIOS to change the boot order back to what it was? Is this all explained in great detail in your Macrium Reflect book, Leo?

    Reply
    • It’s certainly explained in more detail. :-) Let me see if I can answer your specific questions here, though: there’s really only one “size” of CD, but regardless – the smallest capacity will do just fine – the rescue CD is small in comparison. Testing would be a reason to create it beforehand, but I point out not needing to so as to clear up some confusion that you might be in trouble if you don’t (no trouble – just create it when you need it). Testing (which is covered in my backup books) boils down to booting from the rescue CD and then making sure that it can then “see” both your hard disk, AND the backup images on your external drive. After testing, remove the CD and reboot back into Windows. There’s usually no need to re-change the boot order – letting it check the CD first is typically benign.

      Reply
      • Thanks Leo. I checked the capacity of the CD after burning the rescue media and the file was only 19 MB. Meanwhile, I had wasted a 4.7 GB disk (DVD) not knowing beforehand what size to expect in the end result. Live and learn. Then I thought I needed to burn a rescue disk for each machine. I’m starting to think that I only really need just one rescue disk for all my machines. Please confirm this. If I go by the recommendations and burn the rescue media first thing before doing anything else, I won’t have a Reflect backup available for testing at that point. Maybe it’s pointed out in your book to do the rescue disk AND a backup first, before testing.

        I’m so glad to know that once I change the boot order to CD first, that I don’t have to go in later (after testing the rescue disk) and rechange the boot order back to Windows first. You said, “After testing, remove the CD and reboot back into Windows.” So just by removing the CD, the computer will reboot automatically, I guess. Going into BIOS is a scary thing, so a detailed step-by-step is what I’m looking for. I know all machines are not the same, so writing up a tutorial is hard. The other thing that was difficult was figuring out which item in the Boot menu was the CD/DVD drive because of the long series of numbers and letters of available drives to choose from.

        I checked out your book preview (https://store.askleo.com/product/saved-backing-macrium-reflect/) and am very tempted to buy it, but it was written for version 5, is that correct? Now version 6 is available for purchase. Will the instructions in the book work for version 6 also? Or are you planning to update your book?

        Reply
        • Yes, you only need to create one rescue disk for all of your machines, unless of course, one of your machines doesn’t have an optical drive, in which case, you can create a bootable USB flash drive backup. You can still test the rescue media by booting from it. Then when you take a backup, you can test its validity by mounting it either in a normal windows session or booting from the rescue media.

          It’s not possible to do a proper tutorial, as there are so many different BIOS interfaces. You can try Googling your computer brand plus BIOS. You’ll probably find what you’re looking for.

          There will be is free update to Leo’s Macrium 6 book for all who purchased the original Macrium book, so there’s no need to wait.

          Reply
        • One rescue disk is all you need. :-)

          Simply removing the CD will not reboot your machine, but after removing it you would exit the currently running program (the rescue copy of Macrium Reflect) and your machine will reboot.

          I started work on the v6 update to the book this last weekend. Digital copies will be a free update for everyone that has the current book. (Sadly I can’t update paper for free. :-( ).

          Reply
  7. Hi Leo. Just found your site and have been reading everyones issues and your replies what a great site. I have a 10 yr old HP Pavilion a6110n, due to neglect my processor fan filled up with hair from my cat and the processor overheated, I cleaned the fan and processor, it still works but very very slow. I love the computer so I went down to my local store to buy a replacement processor, they said no current processor would fit in the old socket and I would need a new motherboard as well, so bought the MB and figured may as well get a new bigger HHD. Getting ready to change all the components out downloaded Macrium made a clone of my old HHD and the rescue disk, just getting ready to make the changes then I see a warning from youtube presenter that because the MB is not a factory HP replacement part the Bios will not work when you install the new MB you just get a black screen with lines across the bottom. When I made the rescue disk does it not also copy over the bios? My system is using Pheonix Technologies version 5.13 bios. Thanks Tom

    Reply
    • I don’t know about the BIOS issue, but the BIOS isn’t on the hard drive. It is on a flash memory chip on the motherboard. As for restoring the system to the new machine, it might not work as some of the drivers and settings of the old system wouldn’t be compatible with the new motherboard. A new motherboard is similar to a new computer. This article explains why and gives a possible workaround.
      http://ask-leo.com/will_my_backup_work_if_i_replace_my_motherboard.html

      Reply
  8. Hi Leo
    Great article – I probably like hundreds or even thousands of others who have downloaded the FREE version of Macruim Reflect will have been wondering the same – I’m on version 6.3 and like the first writer get invited to upgrade to version 7,xx. Having had to restore an image twice (successfully) have been grate full for Macruim for getting me out of trouble – Knowing my version works has probably prevented me upgrading. But will now but still keep my old – Just in case
    Many thanks for you article

    Reply
  9. Leo –

    I thought I’d mention something some of your readers may benefit from regarding testing a bootable rescue media (mine was Macrium Reflect).

    After going into BIOS to make CD/DVD come before Hard Disk Drive in the boot order, I inserted my CD rescue media and restarted the PC. Surprisingly, the PC booted up normally into Windows 7. I tried this several times with the same result. I triple checked the boot order. I even burned a new CD rescue media, thinking that may be the problem. Finally, I shut down the PC completely. After a minute, with the CD still inserted, I turned on the PC, and the rescue media was finally accessed and the PC booted up into Windows PE. Moral of the story, for me at least: to properly test the rescue media, shut down — don’t restart — the PC.

    I do have a couple of related questions:

    1. If I had NOT adjusted my boot order to make CD/DVD come before HDD, and I had a real situation where my PC wouldn’t boot up, would this have prevented me from using the rescue media? (I believe the answer is “no”, but I want to be sure.)

    2. On one of my PC, it showed “EFI Device” as first in the boot order. What is EFI Device? Does it relate to UEFI (the new bios)?

    Thanks.

    Reply
    • 1) I believe the answer is no as well. I suspect that the “restart” was really a “fast restart” which is not quite the same as a reboot. As you experienced.
      2) Yep, that’s UEFI — be absolutely certain to test booting from external media with that machine. UEFI can be tricky.

      Reply

Leave a reply:

Before commenting please:

  • Read the article.
  • Comment on the article.
  • No personal information.
  • No spam.

Comments violating those rules will be removed. Comments that don't add value will be removed, including off-topic or content-free comments, or comments that look even a little bit like spam. All comments containing links and certain keywords will be moderated before publication.

I want comments to be valuable for everyone, including those who come later and take the time to read.